Yoke Lifting Point UNC Thread
- Rotates through 360° and pivot 90°.
- Manufactured from alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN 1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread (ASME / ANSI B18.3.1M).
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- Design Factor 4 : 1.
- All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
DIMENSIONAL SPECIFICATIONS
| Part Code |
WLL tonnes |
Thread M inch |
Thread E inch |
TPI Threads per inch |
A inch |
B inch |
C inch |
D inch |
F inch |
G inch |
H inch |
S inch |
SW inch |
Torque in Nm |
Mass lbs. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-212-010 | 1 |
1/2 |
0.75 | 13 UNC | 1.30 | 1.46 | 1.73 | 0.53 | 3.86 | 2.24 | 1.42 | 5/16 | 3/4 | 100 | 1.1 |
| 8-212-015 | 1.5 |
5/8 |
0.94 | 11 UNC | 1.30 | 1.46 | 1.81 | 0.53 | 3.86 | 2.24 | 1.42 | 3/8 | 15/16 | 150 | 1.1 |
| 8-212-020 | 2.5 |
3/4 |
1.10 | 10 UNC | 1.97 | 2.13 | 2.20 | 0.65 | 5.51 | 3.23 | 1.73 | 1/2 | 1-1/8 | 250 | 2.9 |
| 8-212-025 | 2.5 |
7/8 |
1.10 | 9 UNC | 1.97 | 2.13 | 2.28 | 0.65 | 5.51 | 3.23 | 1.73 | 5/8 | 1-5/16 | 300 | 2.9 |
| 8-212-040 | 4 |
1 |
1.61 | 8 UNC | 1.97 | 2.13 | 2.34 | 0.65 | 5.51 | 3.23 | 1.73 | 5/8 | 1-1/2 | 400 | 3.1 |
| 8-212-050 | 5 |
1-1/4 |
1.61 | 7 UNC | 2.36 | 2.56 | 3.23 | 0.89 | 6.69 | 3.90 | 2.44 | 7/8 | 1-7/8 | 500 | 6.8 |
| 8-212-080 | 8 |
1-1/2 |
2.25 | 6 UNC | 3.03 | 3.35 | 4.01 | 1.04 | 8.86 | 4.88 | 3.07 | 1 | 2-1/4 | 800 | 12.8 |
USES
Lifting Point uses can be as follows:
- Suited for lifting objects with no obvious attachment points
- Mold and die handling
- Pump and valve handling
- Ideal for lashing attachment points
- Suitable for attachment to lifting beams and spreader beams
LIFTING POINT WORKING LOAD APPLICATION FACTORS
| Thread |  |
 |
 |
 |
 |
 |
 |
 |
|||
|
Number of legs |
1 | 2 | 1 | 2 | 2 | 2 | 3-4 | 3-4 | |||
| Load Direction | 0° | 0° | 90° | 90° | 0-45° | 45-60° | unsymm. | 0-45° | 45-60° | unsymm. | |
| Part Code | Thread | WLL tonnes | |||||||||
|
8-212-010 |
1/2" |
1 | 2 | 1 | 2 | 1.4 | 1 | 1 | 2.1 | 1.5 | 1 |
|
8-212-015 |
5/8" |
1.5 | 3 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
|
8-212-020 |
3/4" |
2.5 | 5 | 2.5 | 5 | 3.5 | 2.5 | 2.5 | 5.2 | 3.7 | 2.5 |
|
8-212-025 |
7/8" |
2.5 | 5 | 2.5 | 5 | 3.5 | 2.5 | 2.5 | 5.2 | 3.7 | 2.5 |
|
8-212-040 |
1" |
4 | 8 | 4 | 8 | 5.6 | 4 | 4 | 8.4 | 6 | 4 |
|
8-212-050 |
1-1/4" |
5 | 10 | 5 | 10 | 7 | 5 | 5 | 10.5 | 7.5 | 5 |
|
8-212-080 |
1-1/2" |
8 | 16 | 8 | 16 | 11.2 | 8 | 8 | 16.8 | 12 | 8 |